RAV4 4WD V6-3.5L (2GR-FE) (2006)
/Page-1240001.png)
Brake Master Cylinder: Testing and Inspection
On-Vehicle Inspection
BRAKE MASTER CYLINDER
ON-VEHICLE INSPECTION
1. CHECK BRAKE FLUID LEVEL WARNING SWITCH
a. Remove the reservoir filler cap and strainer.
b. Disconnect the brake fluid level warning switch connector.
Standard Resistance
c. Measure the resistance of the switch.
HINT: There is a float inside the reservoir. Its position can be changed by increasing or decreasing the brake fluid level.
If the value is not as specified, replace the brake master cylinder reservoir sub-assembly.
d. Add brake fluid to the MAX level.
