RAV4 4WD V6-3.5L (2GR-FE) (2006)
/Page-1288005.png)
g. Connect the speed sensor connector.
2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH
a. Install the deck trim side panel LH.
HINT: Refer to the procedures from the installation of the deck trim side panel LH up until the installation of the rear door scuff plate LH.
3. INSTALL REAR WHEEL
Torque: 103 N.m (1,050 kgf.cm, 76 ft.lbf)
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
5. CHECK SPEED SENSOR SIGNAL
a. Check the speed sensor signal.
