RAV4 4WD V6-3.5L (2GR-FE) (2006)
/Page-516025.png)
A. Make sure that the valve rocker arm is installed as shown.
B. Apply seal packing in a continuous line as shown.
Seal packing: Toyota Genuine Seal Packing Black, Three Bond 1207B, or equivalent
Seal diameter: 3.5 - 4.5 mm (0.138 - 0.177 in.)
NOTE:
-
Remove any oil from the contact surface.
-
Install the camshaft housing sub-assembly RH within 3 minutes.
-
Do NOT start the engine for at LEAST 2 hours after installing.
