RAV4 4WD V6-3.5L (2GR-FE) (2006)
Parts Information
Inspection Procedure
-
If necessary, use an oil dye to confirm the source of the oil leak.
-
Refer to the repair procedure below ONLY if the oil leak source is located at one or both of the camshaft housings.
Disassemble - Part 1
Disassembly
Disassemble the engine to remove the timing cover and replace the RH and LH camshaft housing sub-assemblies.
1. Remove the engine assembly.
Refer to the Technical Information System (TIS), 2006 or 2007 model year RAV4 Repair Manual, Engine/Hybrid System - Engine Mechanical -
"2GR-FE Engine Mechanical: Engine Assembly: Removal".
2. Remove the No. 1 oil pipe.