RAV4 4WD V6-3.5L (2GR-FE) (2006)
(a) Install the front No. 1 engine mounting bracket LH with the 6 bolts.
Torque: 54 Nm (551 kgf cm, 40ft lbf)
NOTICE:
Install the water inlet and mounting bracket within 15 minutes after installing the chain cover.
-
Do not start the engine for at least 2 hours after installation.
HINT:
Be sure to insert the bolt (A) into the bolt hole before installing the No. 1 engine mounting bracket LH to the engine.
6. INSTALL ENGINE MOUNTING STAY NO.2 RH
(a) Install the engine mounting stay No. 2 RH with bolt.