RAV4 4WD V6-3.5L (2GR-FE) (2006)
/Page-593009.png)
(b) Remove the jack.
(c) Install the nut(D).
Nut(D) - Torque: 52 Nm (530 kgf cm, 38ft lbf)
(d) Remove the protective tape from the cooler pipe.
(e) Connect the wire harness with the bolt.
Torque: 8.4 Nm (85 kgf cm, 74in lbf)
9. INSTALL ENGINE MOUNTING STAY RH
