RAV4 4WD V6-3.5L (2GR-FE) (2006)
/Page-1575015.png)
10. REMOVE EVAPORATOR TEMPERATURE SENSOR
a. Disconnect the cooler thermistor clamp from the cooler evaporator.
REASSEMBLY
1. INSTALL EVAPORATOR TEMPERATURE SENSOR
NOTE: If reusing the evaporator, do not insert the sensor to a location where the sensor was previously inserted. Insert the sensor within range C
shown in the illustration.
a. Install the evaporator temperature sensor as shown in the illustration.
2. INSTALL NO. 1 COOLER EVAPORATOR SUBASSEMBLY
a. Install the cooler thermistor and cooler evaporator on the case.
b. Attach the temperature sensor clamp.
