RAV4 4WD V6-3.5L (2GR-FE) (2006)
d. Using SST, remove the oil filter cap together with the oil filter element.
SST 09228-06501
3. REMOVE OIL FILTER ELEMENT
a. Remove the oil filter element and 2 O-rings from the oil filter cap.
NOTICE: Be sure to remove the O-ring (for the cap) by hand, without using any tools, to prevent damage to the groove for the
O-ring on the cap.
4. INSTALL OIL FILTER ELEMENT
a. Clean the oil filter cap threads and O-ring groove.
b. Apply a small amount of engine oil to a new O-ring and install it to the oil filter cap.
c. Set a new oil filter element in the oil filter cap.
5. INSTALL OIL FILTER CAP ASSEMBLY
a. Remove any dirt or foreign matter from the installation surface and inside of the engine.
b. Apply a small amount of engine oil to the O-ring again and install the oil filter cap.
NOTICE: Be careful that the O-ring does not get caught between the parts.