RAV4 4WD V6-3.5L (2GR-FE) (2006)
Oxygen Sensor: Service and Repair
Heated Oxygen Sensor
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
2. REMOVE HEATED OXYGEN SENSOR (for Sensor 2)
a. Bank 1 Sensor 2:
Remove the rear console box.
b. Disconnect the sensor connector.
c. Using SST, remove the sensor from the exhaust pipe.
SST 09224-00010
INSTALLATION