RAV4 4WD V6-3.5L (2GR-FE) (2006)
i.
Using a screwdriver, stake the nut with the lock washer.
j.
Install the control shaft lever with the washer and nut.
Torque: 13 Nm (133 kgf-cm, 10 ft. lbs.)
k. Connect the shift control cable to the control shaft lever with the nut.
Torque: 15 Nm (153 kgf-cm, 11 ft. lbs.)
l.
Connect the switch connector.
2. INSTALL BATTERY
a. Install the battery bracket reinforcement with the 2 bolts.
Torque: 20 Nm (204 kgf-cm, 15 ft. lbs.)
b. Install the battery carrier with the 4 bolts.
Torque: 20 Nm (204 kgf-cm, 15 ft. lbs.)
c. Install the battery tray.
d. Install the battery and insulator with the battery clamp.
Torque:
8.5 Nm (87 kgf-cm, 75 inch lbs.) for bolt
5.0 Nm (51 kgf-cm, 44 inch lbs.) for nut
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
4. ADJUST SHIFT LEVER POSITION
a. Adjust the shift lever position.
5. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY
a. Inspect the switch.