RAV4 4WD V6-3.5L (2GR-FE) (2006)
/Page-56002.png)
d. Remove the 4 screws and 2 ECM brackets.
INSTALLATION
1. INSTALL ECM
a. Install the 2 brackets to the ECM with the 4 screws.
Torque: 3.0 N.m (30 kgf.cm, 27 in.*lbf)
b. Connect the 2 ECM connectors.
NOTE: When connecting the connector, make sure that dirt, water and other foreign matter does not become stuck between the connector and
other part.
1. Connect the 2 ECM connectors and lower the 2 levers.
NOTE: Make sure that the 2 levers are securely lowered.
