RAV4 4WD V6-3.5L (2GR-FE) (2006)
Impact Sensor: Testing and Inspection
Front Airbag Sensor
ON-VEHICLE INSPECTION
1. CHECK FRONT AIRBAG SENSOR (VEHICLE NOT INVOLVED IN COLLISION AND AIRBAG NOT DEPLOYED)
a. Perform a diagnostic system check
2. CHECK FRONT AIRBAG SENSOR (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)
a. Perform a diagnostic system check
b. If the front fender of the vehicle or its periphery are damaged, perform a visual check:
-
Check for cracks, dents or chips in the case.
-
Check for cracks, dents, chips and scratches in the connector.
-
Check for peeling off of the label or damage to the serial number.
If any of the defects mentioned above are present, replace the front airbag sensor with a new one.
3. CHECK FRONT AIRBAG SENSOR (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS DEPLOYED)
a. Replace the front airbag sensor.
CAUTION: For removal and installation of the front airbag sensor, be sure to follow the correct procedures.
HINT: If the airbags have deployed, replace the front airbag sensor on the side in which the collision occurred. Replace both if necessary.