RAV4 4WD V6-3.5L (2GR-FE) (2006)
Seat Occupant Sensor: Reading and Clearing Diagnostic Trouble Codes
With Manufacturer Scan Tool
DTC CLEAR
a. Connect the intelligent tester (with CAN VIM) to the DLC3.
b. Turn the ignition switch ON.
c. Clear the DTCs by following the prompts on the tester screen.
HINT: Refer to the intelligent tester operator's manual for further details.
Without Scan Tool
TOYOTA does not provide a procedure for Clearing Trouble Codes Without Scan Tool.
With Manufacturer's Scan Tool
CHECK DTC
HINT:
-
When DTC B1650/23 is detected as a result of troubleshooting for the airbag system, troubleshoot the occupant classification system.
-
Use the intelligent tester (with CAN VIM) to read and clear DTCs, otherwise the DTCs cannot be read and cleared.
a. Connect the intelligent tester (with CAN VIM) to the DLC3.
b. Turn the ignition switch ON.
c. Check for DTCs by following the prompts on the tester screen.
HINT: Refer to the intelligent tester operator's manual for further details.
Without Scan Tool
TOYOTA does not provide a procedure for Reading Trouble Codes Without Scan Tool.