RAV4 4WD V6-3.5L (2GR-FE) (2006)
2. INSPECT SPEED SENSOR NC
Measure the resistance of the sensor.
Standard resistance
INSTALLATION
1. INSTALL SPEED SENSOR NC
a. Coat a new O-ring with ATF.
b. Install the O-ring to the sensor.
c. Install the sensor with the bolt.
Torque: 11 Nm (112 kgf-cm, 8 ft. lbs.)
d. Connect the sensor connector.
2. INSTALL SPEED SENSOR NT
a. Coat a new O-ring with ATF.
b. Install the O-ring to the sensor.
c. Install the sensor with the bolt.
Torque: 11 Nm (112 kgf-cm, 8 ft. lbs.)
d. Connect the sensor connector.
3. INSTALL BATTERY
a. Install the battery bracket reinforcement with the 2 bolts.
Torque: 20 Nm (204 kgf-cm, 15 ft. lbs.)
b. Install the battery carrier with the 4 bolts.
Torque: 20 Nm (204 kgf-cm, 15 ft. lbs.)
c. Install the battery tray.
d. Install the battery and insulator with the battery clamp.
Torque:
8.5 Nm (87 kgf-cm, 75 inch lbs.) for bolt
5.0 Nm (51 kgf-cm, 44 inch lbs.) for nut