RAV4 4WD V6-3.5L (2GR-FE) (2006)
9. TIGHTEN FRONT SUSPENSION LOWER NO. 1 ARM SUB-ASSEMBLY LH
a. Using SST, and tighten the bolt on the front side. SST 09961-01270.
Torque: 223 Nm (2,376 kgf-cm, 172 ft. lbs.) for use without SST, 175 Nm (1,785 kgf-cm, 129 ft. lbs.) for use with SST
NOTICE: Do not tighten the nut.
b. Fix the nut in place and tighten the bolt on the rear side.
Torque: 223 Nm (2,376 kgf-cm, 172 ft. lbs.)
NOTICE: Do not tighten the nut.
10. TIGHTEN FRONT SUSPENSION LOWER NO. 1 ARM SUB-ASSEMBLY RH
HINT: Use the same procedures described for the LH side.
11. INSTALL HOOD SUB-ASSEMBLY
12. INSPECT AND ADJUST HOOD SUB-ASSEMBLY
a. Inspect and adjust the hood.
13. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT
a. Inspect and adjust the front wheel alignment.