RAV4 4WD V6-3.5L (2GR-FE) (2006)
a. Install the control cable with the 2 bolts.
Torque: 5.0 Nm (51 kgf-cm, 44 inch lbs.)
b. Turn the nut of the control cable and push in the lock.
c. Install the control cable onto the shift lever retainer.
NOTICE:
^
Install the cable with the protruding portion of the cable outer facing upward.
^
After installing, check that the lock of the cable outer is protruding beyond portion A-A, as shown in the illustration.