RAV4 4WD V6-3.5L (2GR-FE) (2006)
/Page-1091008.png)
^
After installing, check that the lock of the cable outer is protruding beyond portion A-A, as shown in the illustration.
c. Connect the control cable to the shift lever.
NOTICE: Connect the control cable so that the adjusting mechanism lock of the control cable is installed on the driver side of the vehicle.
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
4. INSPECT SHIFT LEVER POSITION
5. ADJUST SHIFT LEVER POSITION
6. INSTALL REAR CONSOLE BOX SUB-ASSEMBLY
a. Install the rear console box.
7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
