RAV4 4WD V6-3.5L (2GR-FE) (2006)
/Page-1105004.png)
c. Disconnect the transmission wire connector.
d. Remove the bolt and transmission wire connector.
e. Remove the O-ring from the transmission wire.
INSPECTION
1. INSPECT TRANSMISSION WIRE
a. Measure the resistance of the transmission wire.
Standard resistance
If the result is not as specified, replace the wire.
HINT: If the resistance is not as specified for either of the ATF temperatures shown in the table, the driveablity of the vehicle may decrease.
Standard resistance
INSTALLATION
1. INSTALL TRANSMISSION WIRE
