toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Wheel Bearing > < Front Drive Shaft|Page 5573
Page 9
background image

9. INSTALL CENTER EXHAUST PIPE ASSEMBLY

10. INSTALL TAILPIPE ASSEMBLY
11. INSTALL REAR WHEEL

Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)

12. ADD DIFFERENTIAL OIL
13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE: When the warning light is illuminated or the battery has been disconnected and reconnected, turning the power switch may not start the
system on the first try. If so, turn the power switch again.

14. CHECK FOR DIFFERENTIAL OIL LEAKAGE
15. CHECK FOR EXHAUST GAS LEAKAGE

If gas is leaking, tighten the areas necessary to stop the leak. Replace damaged parts as necessary.

16. INSPECT REAR WHEEL ALIGNMENT

a. Inspect the rear wheel alignment.

Wheel Bearing > < Front Drive Shaft|Page 5573