RAV4 4WD V6-3.5L (2GR-FE) (2006)
/Page-1162002.png)
3. REMOVE 4WD CONTROL ECU
a. Disconnect the connector.
b. Remove the bolt and ECU.
INSTALLATION
1. INSTALL 4WD CONTROL ECU
a. Install the ECU with the bolt.
Torque: 4.5 Nm (46 kgf-cm, 40 inch lbs.)
b. Connect the connector.
2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
