RAV4 4WD V6-3.5L (2GR-FE) (2006)
Diagram Legend
O: Explains the system outline.
Q: Indicates the reference page showing the position on the vehicle of Relay Block Connectors in the system circuit.
Example : Connector "1" is described and is installed on the left side of the instrument panel.
R: Indicates the reference page showing the position on the vehicle of J/B and Wire Harness in the system circuit.
Example : Connector "3C" connects the Instrument Panel Wire and J/B No.3. It is described and is installed on the instrument panel left side.
S: Indicates the reference page describing the wiring harness and wiring harness connector (the female wiring harness is shown first, followed by the
male wiring harness).
Example : Connector "CH1" connects the Engine Room Main Wire (female) and Instrument Panel Wire (male). It is described and is installed on
the left side kick panel.
T: Indicates the reference page showing the position of the ground points on the vehicle.
Example : Ground point "H2" is described and is installed on the back panel center.
How to Read Connector List
HOW TO READ CONNECTOR LIST
A: Indicates connector to be connected to a part. (The numeral indicates the pin No.)
B: Junction Connector
Indicates a connector which is connected to a short terminal.