RAV4 4WD V6-3.5L (2GR-FE) (2006)
INSTALLATION
1. INSTALL NO. 2 WINDSHIELD GLASS STOPPER
a. Apply Primer G to the glass where the spacers will be installed.
NOTE:
-
Allow the primer to dry for 3 minutes or more.
-
Throw away any leftover primer.
-
Do not apply too much primer.
b. Install 2 new spacers onto the glass as shown in the illustration.
2. INSTALL NO. 1 WINDSHIELD GLASS STOPPER
a. Install 2 new stoppers to the vehicle body as shown in the illustration.
3. INSTALL WINDOW GLASS ADHESIVE DAM
a. Apply Primer G to the glass where the glass adhesive dams will be installed.
NOTE:
-
Allow the primer to dry for 3 minutes or more.
-
Throw away any leftover primer.
-
Do not apply too much primer.