Sequoia 2WD V8-4.6L (1UR-FE) (2010)
/Page-2159001.png)
Blower Motor Relay: Testing and Inspection
HEATING / AIR CONDITIONING: RELAY: ON-VEHICLE INSPECTION
1. INSPECT MAGNET CLUTCH RELAY
(a) Check the resistance.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(2) If the result is not as specified, replace the relay.
2. INSPECT CONDENSER FAN RELAY
(a) Check the resistance.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(2) If the result is not as specified, replace the relay.
