Sequoia 2WD V8-4.6L (1UR-FE) (2010)
/Page-2167002.png)
(a) Using a moulding remover, disengage the 4 claws and remove the rear room temperature sensor.
(b) Disconnect the connector.
Installation
HEATING / AIR CONDITIONING: ROOM TEMPERATURE SENSOR (for Rear Side): INSTALLATION
1. INSTALL ROOM TEMPERATURE SENSOR (COOLER (DUCT SENSOR) THERMISTOR)
(a) Connect the connector.
(b) Attach the 4 claws and install the rear room temperature sensor.
