Sequoia 2WD V8-4.6L (1UR-FE) (2010)
Entertainment System Control Module: Service and Repair
Installation
AUDIO / VIDEO: MULTI-MEDIA INTERFACE ECU: INSTALLATION
1. INSTALL MULTI-DISPLAY CONTROLLER BRACKET A
(a) Install the multi-display controller bracket A with the 2 bolts.
Torque : 2.0 Nm (20 kgf-cm, 17 in-lbf)
2. INSTALL MULTI-MEDIA INTERFACE ECU
(a) Connect the connector.
(b) Install the multi-media interface ECU with the nut.
Torque : 8.0 Nm (80 kgf-cm, 70 in-lbf)
3. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY
(a) Install the instrument panel See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Installation.
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning.
5. CHECK SRS WARNING LIGHT See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Knee Airbag Assembly (for Driver
Side)/Installation