Sequoia 2WD V8-4.6L (1UR-FE) (2010)
Keyless Entry Module: Service and Repair
Installation
DOOR LOCK: DOOR CONTROL RECEIVER: INSTALLATION
1. INSTALL DOOR CONTROL RECEIVER
(a) Install the door control receiver with the bolt.
Torque : 7.4 Nm (75 kgf-cm, 65 in-lbf)
(b) Connect the connector.
2. INSTALL QUARTER TRIM PANEL ASSEMBLY LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
3. INSTALL QUARTER TRIM PANEL ASSEMBLY LH (for Power Seat) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
4. INSTALL REAR FLOOR MAT SUPPORT PLATE See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
5. INSTALL ROPE HOOK ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
6. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
7. INSTALL REAR DOOR SCUFF PLATE LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
8. INSTALL REAR FLOOR STEP NO. 1 COVER See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
9. INSTALL REAR FLOOR STEP NO. 2 COVER See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
10. INSTALL REAR SEAT CUSHION HINGE LOWER COVER LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
11. INSTALL REAR NO. 2 SEAT ASSEMBLY LH
(a) Remove the rear No. 2 seat assembly LH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear No. 2 Seat
Assembly (for Manual Seat Type LH Side)/Installation.
12. INSTALL REAR NO. 2 SEAT ASSEMBLY LH
(a) Remove the rear No. 2 seat assembly LH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear No. 2 Seat
Assembly (for Power Seat Type LH Side)/Installation.
13. INSTALL DECK BOARD BRACKET See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
14. INSTALL DECK BOARD REINFORCEMENT SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
15. INSTALL NO. 1 DECK BOARD SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
16. INSTALL ROPE HOOK ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
17. INSTALL LUGGAGE COMPARTMENT TRIM BOX See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation