toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Knee Airbag Assembly (for Driver Side)|Page 7384 > < Knee Airbag Assembly (for Driver Side)|Page 7382
Page 7
background image

NOTICE:
As the tires may be damaged by the airbag deployment, use a tire that you are planning to throw away.

(e) Install SST.

(1) After connecting SST to each other, connect them to the curtain shield airbag.

SST : 09082-00802

09082-10801

09082-40800

(f) Place the tires.

NOTICE:
Do not place the deployment direction of the curtain shield airbag facing the ground.

(1) Place at least 2 tires under the tire which the curtain shield airbag is tied to.

(2) Place at least 2 tires over the tire which the curtain shield airbag is tied to. The top tire should have the disc wheel installed.

NOTICE:
*

Do not place SST connector under the tire because it could be damaged.

*

As the disc wheel may be damaged by the airbag deployment, use a disc wheel that you are planning to throw away.

*

As the tires may be damaged by the airbag deployment, use a tire that you are planning to throw away.

(3) Tie the tires together with 2 wire harnesses.

NOTICE:
Make sure that the wire harnesses are tight. Looseness in the wire harnesses results in the tires coming free due to the shock when the
airbag is deployed.

(g) Install SST.

Knee Airbag Assembly (for Driver Side)|Page 7384 > < Knee Airbag Assembly (for Driver Side)|Page 7382