Sequoia 2WD V8-4.6L (1UR-FE) (2010)
/Page-1724001.png)
Starter Relay: Testing and Inspection
1UR-FE STARTING: RELAY: ON-VEHICLE INSPECTION
1. INSPECT STARTER RELAY (ST)
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(b) If the result is not as specified, replace the relay.
2. INSPECT ACC CUT RELAY (ACC CUT)
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(b) If the result is not as specified, replace the relay.
3. INSPECT MAIN BODY ECU (ACC RELAY)
