Sequoia 2WD V8-4.7L (2UZ-FE) (2003)
/Page-1498004.png)
a. Remove the clip.
b. Remove the center pillar garnish.
c. Use the same manner described above to the other side.
13. REMOVE DOME LIGHT
a. Using a screwdriver, remove the lens.
HINT: Tape the screwdriver tip before use.
b. Remove the 2 screws and dome light, then disconnect the connector.
14. REMOVE REAR TRIM COVER
Using a screwdriver, remove the rear trim cover.
HINT: Tape the screwdriver tip before use.
