Sequoia 2WD V8-4.7L (2UZ-FE) (2003)
15. REMOVE REAR TRIM
Using a screwdriver, remove the rear trim.
HINT: Tape the screwdriver tip before use.
16. REMOVE REAR FLOOR MAT SUPPORT PLATE
17. w/o Rear No. 2 seat:
REMOVE QUARTER TRIM HOLE COVER
a. Using a screwdriver, remove the quarter trim hole cover.
HINT: Tape the screwdriver tip before use.
b. Use the same manner described above to the other side.
18. w/ Rear No. 2 seat:
REMOVE QUARTER TRIM UPPER BELT HOLE COVER
a. Using a screwdriver, remove the quarter trim upper belt hole cover.
HINT: Tape the screwdriver tip before use.
b. Use the same manner described above to the other side.
19. REMOVE QUARTER TRIM PANEL LH
a. w/o Rear A/C:
Using a screwdriver, remove the deck side trim cover.
HINT: Tape the screwdriver tip before use.