toyota Workshop Repair Guides

Toyota Sequoia 2WD V8-47L Workshop Service and Auto Repair Manuals

All Technical Service Bulletins for Traction Control Module:|SC-A0G > < Traction Control Indicator Lamp|Testing and Inspection|Page 3981
Page 1
background image

Traction Control Module: All Technical Service Bulletins
Recall 10V176000: Traction Control Module Replacement

VEHICLE MAKE/MODEL:       MODEL YEAR(S):  
     
Toyota/Sequoia                2003
 
MANUFACTURER: Toyota Motor North America, Inc. 

MFR'S REPORT DATE: April 28, 2010 

NHTSA CAMPAIGN ID NUMBER: 10V176000  

NHTSA ACTION NUMBER: EA09006  
 
COMPONENT: Traction Control System 

POTENTIAL NUMBER OF UNITS AFFECTED: 50000 

SUMMARY: 
 Toyota is recalling certain model year 2003 Sequoia passenger vehicles manufactured from April 1, 2002 through April 17, 2003. The center position of
the Steering Angle Sensor (SAS) may not be stored correctly due to improper logic of the skid control ECU programming. The Vehicle Stability Control
(VSC) system could activate at low speed for a few seconds during acceleration from a stopped position. 

CONSEQUENCE: 
 Should this occur, the vehicle may not accelerate as quickly as the driver expects, increasing the risk of a crash. 

REMEDY: 
 Toyota will notify owners and dealers will replace the skid control ECU free of charge. The safety recall is expected to begin during May 2010. Owners
may contact Toyota at 1-800-331-4331. 

NOTES: 
 Owners may also contact The National Highway Traffic Safety Administration's Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or
go to http://www.safercar.gov.

All Technical Service Bulletins for Traction Control Module:|SC-A0G > < Traction Control Indicator Lamp|Testing and Inspection|Page 3981