Sequoia 2WD V8-4.7L (2UZ-FE) (2003)
1. REMOVE CYLINDER BOOT SET RINGS AND BOOTS
Using a screwdriver, remove the 4 cylinder boot set rings and boots.
2. REMOVE PISTONS FROM CYLINDER
a. Prepare the wooden plate to hold the pistons.
b. Place the plate between the pistons and insert a pad at one side.
c. Use compressed air to remove the pistons alternately from the cylinder.
CAUTION: Do not place your fingers in front of the pistons when using compressed air.
3. REMOVE PISTON SEALS
Using a screwdriver, remove the 4 piston seals from the cylinder.
INSPECTION
1. MEASURE PAD LINING THICKNESS