Sequoia 2WD V8-4.7L (2UZ-FE) (2003)
3.
Perform steering angle sensor zero point calibration.
A.
Disconnect the Diagnostic Tester.
B.
Calibrate the steering angle sensor by driving the vehicle above 28 mph (45 km/h).
4.
Confirm zero point calibration.
A.
Stop the vehicle.
B.
Place the shifter in the "P" position.
C.
Connect the Diagnostic Tester to DLC3.
D.
View the ABS/VSC Data List to see that the steering angle value changes when turning the steering wheel.
5.
Disconnect the Diagnostic Tester and turn the ignition switch OFF.