Sequoia 2WD V8-4.7L (2UZ-FE) (2003)
8. REMOVE RADIATOR ASSEMBLY
Remove the 4 bolts and radiator assembly.
9. REMOVE NO.1 FAN SHROUD
Remove the 4 bolts and No.1 fan shroud.
INSTALLATION
1. INSTALL NO.1 FAN SHROUD
Install the No.1 fan shroud with the 4 bolts.
Torque: 5 Nm (50 kgf-cm, 44 inch lbs.)
2. INSTALL RADIATOR ASSEMBLY
a. Set the radiator bracket hooks to the radiator support holes.
b. Install the 4 bolts.
Torque: 12 Nm (120 Nm, 9 ft. lbs.)
3. INSTALL NO.2 FAN SHROUD
Install the No.2 fan shroud with the 2 clips.
4. CONNECT A/T OIL COOLER HOSES TO RADIATOR
5. CONNECT UPPER RADIATOR HOSE TO RADIATOR
6. CONNECT LOWER RADIATOR HOSE TO RADIATOR
7. CONNECT RADIATOR RESERVOIR HOSE TO RADIATOR
8. FILL WITH ENGINE COOLANT
9. START ENGINE AND CHECK FOR ENGINE COOLANT LEAKS
10. RECHECK ENGINE COOLANT LEVEL
11. INSTALL ENGINE UNDER COVER