Sequoia 2WD V8-4.7L (2UZ-FE) (2003)
Auxiliary Power Outlet: Component Tests and General Diagnostics
INSPECTION
1. INSPECT MAIN SWITCH CONTINUITY
If continuity is not as specified, replace the switch.
2. INSPECT MAIN INDICATOR LIGHT OPERATION
a. Connect the positive (+) lead from the battery to terminal 3 and the negative (-) lead to terminal 2.
b. Push the main switch and check that the indicator light comes on.
If operation is not as specified, replace the switch and inspect the circuits connected to other parts.
3. INSPECT INVERTER RELAY CONTINUITY
If continuity is not as specified, replace the switch.