toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Brakes - VSC Lamp ON/DTC C1203 Stored|Page 97 > < Sunroof / Moonroof Module|Locations|Page 87
Page 1
background image

Electronic Brake Control Module: All Technical Service Bulletins
Brakes - VSC Lamp ON/DTC C1203 Stored

BRAKES
BR002-03
REVISED

September 3, 2003

Title:
VSC COMMUNICATION BETWEEN SKID CONTROL COMPUTER AND ECM - DTC C1203

Models:
'03 Sequoia

TSB REVISION NOTICE:

September 15, 2003: The VIN information was changed. The previous TSB should be discarded.

Introduction 

Some 2003 model year Sequoia vehicles may experience a VSC light ON condition with DTC C1203 in the Skid Control Computer memory. A
modification to the Translate Computer logic has been made to prevent this condition.

Applicable Vehicles
^

2003 model year Sequoia vehicles produced BEFORE the Production Change Effective VIN shown below.

Production Change Information

Parts Information

Warranty Information

Applicable Warranty *:

This repair is covered under the Toyota Comprehensive Warranty. This warranty is in effect for 36 months or 36,000 miles, whichever occurs first, from
the vehicle's in-service date.

*

Warranty application is limited to correction of a problem based upon a customer's specific complaint.

Required SSTs

NOTE:

Additional Diagnostic Tester Kits, Program Cards or SSTs may be ordered by calling SPX/OTC at 1-800-933-8335.

Brakes - VSC Lamp ON/DTC C1203 Stored|Page 97 > < Sunroof / Moonroof Module|Locations|Page 87