Sequoia 2WD V8-4.7L (2UZ-FE) (2003)
/Page-1319002.png)
-
Check for damage on the connector and wire harness.
* Refer to SRS Warning Light Check, and How to Display and Read Diagnostic Trouble Codes.
SEAT BELT PRETENSIONER
REPLACEMENT
REPLACE REQUIREMENTS
In the following cases, replace the seat belt pretensioner.
-
If the seat belt pretensioner has been activated.
-
If the seat belt pretensioner has been found to be faulty in troubleshooting.
-
If the front seat outer belt has been found to be faulty during the check in items.
-
If the front seat outer belt has been dropped.
CAUTION: Be sure to follow the correct procedure, for removal and installation of the side and curtain shield airbag sensor assembly.
