Sequoia 2WD V8-4.7L (2UZ-FE) (2003)
/Page-1194002.png)
4. REMOVE STABILIZER BAR FROM REAR AXLE HOUSING
a. Remove the 4 bolts and stabilizer bar with the bushings and brackets.
Torque: 37 Nm (377 kgf-cm, 27 ft. lbs.)
b. Remove the 2 brackets and 2 bushings from the stabilizer bar.
INSPECTION
INSPECT STABILIZER BAR LINK
Rotate the ball joint stud in all directions. If the movement is not smooth and free, replace the stabilizer link.
INSTALLATION
Installation is in the reverse order of removal.
