Sequoia 4WD V8-4.6L (1UR-FE) (2010)
/Page-1795001.png)
Wheel Speed Sensor: Service and Repair
Front Speed Sensor
Components
BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: FRONT SPEED SENSOR: COMPONENTS
Removal
BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: FRONT SPEED SENSOR: REMOVAL
1. REMOVE FRONT WHEEL
2. REMOVE FRONT SPEED SENSOR LH
(a) Disconnect the front speed sensor connector.
(b) Using a hexagon wrench, remove the bolt and front speed sensor.
Installation
BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: FRONT SPEED SENSOR: INSTALLATION
1. INSTALL FRONT SPEED SENSOR LH
(a) Using a hexagon wrench, install the front speed sensor with the bolt.
