Sequoia 4WD V8-4.6L (1UR-FE) (2010)
Condenser Fan: Service and Repair
Installation
HEATING / AIR CONDITIONING: CONDENSER FAN: INSTALLATION
1. INSTALL BUSH
(a) Install the 2 grommets and 2 bushes.
2. INSTALL COOLING FAN MOTOR
(a) Install the cooling fan motor with the 3 screws.
(b) Attach the 2 clamps.
3. INSTALL COOLING FAN ASSEMBLY
(a) Install the cooling fan with the 3 screws.
4. INSTALL SHROUD BLOWER ASSEMBLY
(a) Install the shroud blower with the 2 bolts.
Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)
(b) Connect the connector.