Sequoia 4WD V8-4.6L (1UR-FE) (2010)
(b) Detach the 4 claws and remove the air conditioning control.
Installation
HEATING / AIR CONDITIONING: REAR AIR CONDITIONING PANEL: INSTALLATION
1. INSTALL AIR CONDITIONING CONTROL ASSEMBLY
(a) Attach the 4 claws and install the air conditioning control.
(b) Install the 3 screws.
2. INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY
(a) Attach the 2 clamps and install the console rear end panel.
(b) Connect the 4 connectors.
(c) Attach the 6 clips and install the console rear end panel.