Sequoia 4WD V8-4.6L (1UR-FE) (2010)
6. INSTALL HEATER RADIATOR UNIT SUB-ASSEMBLY
(a) Install the heater radiator unit as shown in the illustration.
(b) Attach the claw and install the heater clamp.
(c) Install the heater clamp with the screw.
7. INSTALL HEATER WATER OUTLET HOSE
(a) Using pliers, grip the claws of the clip and slide the clips to connect the heater water hose.
8. INSTALL HEATER WATER INLET HOSE
(a) Using pliers, grip the claws of the clip and slide the clips to connect the heater water hose.
9. INSTALL WATER PIPE SUB-ASSEMBLY
(a) Using pliers, grip the claws of the 2 clips and slide the clips to install the water pipe.
(b) Install the bracket with the 4 screws.