Sequoia 4WD V8-4.6L (1UR-FE) (2010)
/Page-73001.png)
Headlamp Relay: Testing and Inspection
LIGHTING (EXT): RELAY: ON-VEHICLE INSPECTION
1. INSPECT HEADLIGHT DIMMER RELAY
(a) Check the resistance.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(2) If the result is not as specified, replace the headlight dimmer relay.
2. INSPECT HEADLIGHT RELAY
(a) Check the resistance.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(2) If the result is not as specified, replace the headlight relay.
3. INSPECT FOG LIGHT RELAY
