Sequoia 4WD V8-4.6L (1UR-FE) (2010)
NOTICE:
Be careful not to damage the No. 2 steering rack boot.
6. REMOVE NO. 2 STEERING RACK BOOT
7. REMOVE NO. 1 STEERING RACK BOOT
8. REMOVE STEERING RACK END SUB-ASSEMBLY
(a) Using a screwdriver and hammer, stake back the washer.
NOTICE:
Do not strike the steering rack.
(b) Using a wrench, hold the steering rack (LH side).
(c) Using SST, remove the steering rack end (LH side) from the power steering rack.
SST : 09922-10010
NOTICE:
Rotate SST in the direction shown in the illustration.
(d) Using SST, remove the steering rack end (RH side) from the power steering rack.
SST : 09922-10010
NOTICE:
Rotate SST in the direction shown in the illustration.
(e) Remove the 2 claw washers.
9. REMOVE STEERING GEAR RACK GUIDE
(a) Using SST, remove the steering rack guide spring cap nut.
SST : 09922-10010
NOTICE:
Rotate SST in the direction shown in the illustration.