Sequoia 4WD V8-4.6L (1UR-FE) (2010)
/Page-1544005.png)
2. REMOVE FRONT PROPELLER SHAFT ASSEMBLY
(a) Place matchmarks on the differential and propeller shaft flange.
(b) Place matchmarks on the transfer and propeller shaft flanges.
(c) Remove the 8 nuts and 8 washers and remove the front propeller shaft assembly.
Installation
DRIVE SHAFT / PROPELLER SHAFT: FRONT PROPELLER SHAFT ASSEMBLY: INSTALLATION
1. INSTALL FRONT PROPELLER SHAFT
(a) Align the matchmarks on the differential and propeller shaft flange.
