Sequoia 4WD V8-4.6L (1UR-FE) (2010)
Wiper Switch: Service and Repair
Installation
WIPER / WASHER: WIPER SWITCH: INSTALLATION
1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY
(a) Engage the claw and install the wiper switch.
(b) Connect the 2 connectors.
2. INSTALL UPPER STEERING COLUMN COVER
(a) Engage the 4 clips to install the upper steering column cover onto the instrument panel cluster finish panel.
(b) Engage the claw to install the upper steering column cover.
3. INSTALL LOWER STEERING COLUMN COVER
(a) Engage the 2 claws to install the lower steering column cover.
NOTICE:
Do not damage the tilt and telescopic switch.
(b) While turning the steering wheel to the right and left, install the 2 screws and the lower steering column cover.