Sequoia 4WD V8-4.7L (2UZ-FE) (2006)
/Page-1396004.png)
4. "LAN Monitor" can be used as a switch to activate "LAN Monitor" for detail information. Check faulty parts of the components in these
modes by referring to the DTC code list.
HINT:
-
Detecting no LAN DTC activates the LAN Monitor on the screen.
-
The LAN Monitor chooses and displays the LAN DTC out of DTC of components identified as "CHEK" in the LAN Monitor.
5. Read Check Result
HINT:
-
After repairing and checking, press "Code CLR" for more than 3 sec. to delete diagnosis memory.
-
After deleting diagnosis memory, press "Recheck" and make sure "OK" is displayed on the screen.
