Sequoia 4WD V8-4.7L (2UZ-FE) (2006)
/Page-1405002.png)
3. INSPECT GARAGE DOOR OPENER SWITCH CIRCUIT (w/ Sliding Roof)
a. Disconnect the connector from the switch and inspect the connector on the wire harness side, as shown.
If the circuit is not as specified, inspect the power source or wire harness.
4. INSPECT GARAGE DOOR OPENER SWITCH CIRCUIT (w/o Sliding Roof)
a. Disconnect the connector from the switch and inspect the connector on the wire harness side, as shown.
If the circuit is not as specified, inspect the power source or wire harness.
