toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 6146 > < Initial Inspection and Diagnostic Overview|Page 6144
Page 40
background image

b. The following symptoms are not a malfunction, but are caused by errors inherent in the GPS, gyro sensor, speed sensor, and navigation ECU.

1. The current position mark may be displayed on a nearby parallel road.

2. Immediately after a fork in the road, the current vehicle position mark may be displayed on the wrong road.

3. When the vehicle turns right or left at an intersection, the current vehicle position mark may be displayed on a nearby parallel road.

4. When the vehicle is carried, such as on a ferry, and the vehicle itself is not running, the current vehicle position mark may be displayed in

the position where the vehicle was until a measurement can be performed by GPS.

5. When the vehicle runs on a steep hill, the current vehicle position mark may deviate from the correct position.

Initial Inspection and Diagnostic Overview|Page 6146 > < Initial Inspection and Diagnostic Overview|Page 6144