Sequoia 4WD V8-4.7L (2UZ-FE) (2006)
Brake Master Cylinder: Service and Repair
Disassembly and Assembly
BRAKE MASTER CYLINDER
Brake Master Cylinder Components
DISASSEMBLY
1. REMOVE BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY
a) Remove the set screw and pull out the reservoir.
Torque: 1.5 Nm (15 kgf-cm, 13 ft. lbs.)
b) Remove the cap and strainer from the reservoir.
2. REMOVE MASTER CYLINDER RESERVOIR GROMMET